Road Marking Glass Beads Construction Requirements

Reflective glass bead material is a new concept of reflective material, which can overcome the defects of traditional marking and greatly improve the safety level of road marking. Whether in the daytime or in the rainy night, it can still be bright and reflective, so that vehicles can walk all the way and ensure the safety of driving in the rainy night. It is a replacement product for ordinary glass beads.

Glass beads for road markings are embedded in reflective materials up to about 60%. The construction quantity of bright reflective glass beads is 180 to 200g/㎡. The dry reflective brightness is kept at 200 MCD/Lux/㎡ and the wet reflective brightness is also kept at 150 MCD/Lux/㎡. At the same time, the high brightness reflective glass beads used in the reflective material undergo a special anti-pollution treatment, which provides excellent resistance to pollution and further enhances durability. While providing a safe marking effect, it can also greatly reduce the maintenance cost of the marking at a later stage.

Construction requirements

When using the new reflective glass beads for marking construction, the following requirements should be met during the construction process: ensure that the road marking glass beads have a settlement of 50% to 60% in the material, too much settlement will result in a small initial reflection coefficient and insufficient settlement will result in insufficient fastness.

At the same time, the construction volume of road marking glass beads should be 180 to 200g/㎡. This reflective material has no special requirements for construction equipment and is suitable for all known reflective marking construction equipment. There is no need to make any modifications to the construction equipment during the construction process, and it is sufficient to replace ordinary glass beads with this material. As the fluidity and particle size of this material is slightly different from ordinary glass beads, the parameters should be adjusted appropriately during the construction process.

For spray marking equipment, the spray pressure of the glass beads should be increased appropriately. For hot-melt marking equipment, the spreader and melting temperature should be adjusted appropriately. During the marking construction process, the marking constructors can still operate and construct according to their own construction methods and habits without adding new equipment. During construction, the construction requirements should be observed. The spraying pressure of the glass beads should be increased appropriately. For hot melt marking equipment, the spreader and melting temperature should be adjusted appropriately.

During the marking process, the marking operator can still operate and work according to his own construction methods and habits without adding new equipment. During construction, the construction requirements should be observed.

In summary, road traffic marking has an important role in ensuring road traffic safety, especially in the rainy night of road traffic, a good reflective effect can play a good role in guiding vehicles to avoid traffic accidents. It also has excellent pollution resistance and durability, which can reduce the risk of damaging road markings and extend the maintenance cycle of road markings, saving a lot of costs for later operation and maintenance.

Therefore, reflective glass bead material has good application value in road marking. TENROADS sells all kinds of road marking glass beads, with quality assurance, welcome you to send us a message, we'll be happy to serve you.