blog
-
The Advantages of Sandblasting Glass Bead
22
02
2021
Ⅰ. Specifications of sandblasting glass beadsAt present, the general standard of sandblasting glass beads on the market has a maximum diameter of 850μm and a minimum of 0μm. According to the granul...
-
What is the Reflection Principle of Reflective Glass Bead?
15
02
2021
1. Introduction of reflective glass beadsReflective glass beads are a new product in the modern glass industry. Its high reflectivity makes this product widely used. It has achieved good results on ze...
-
Key Points in the Use of Micro Glass Beads
08
02
2021
1. Introduction to the characteristics of micro glass beadsBecause of the specific work use, although the final use of the micro glass beads is the same after the construction method, the various envi...
-
Hollow Glass Beads - a Good Partner for High-performance Adhesives
01
02
2021
1. Introduction of hollow glass beadsHollow glass bead is a kind of hollow, small spherical powder containing inert gas. It is a non-metallic inorganic material. It has good features like light weight...
-
Which Plastic Varieties Are Hollow Glass Beads Suitable for
25
01
2021
1. The chemical composition of hollow glass beadsSiO2: 50%-90%, Al2O3: 10%-50%, K2O: 5%-10%, CaO: 1%-10%, B2O3:0-12%2. Plastic varieties suitable for hollow glass beads(1) Hollow glass beads are used ...
-
How to Use High Index Reflective Glass Beads
18
01
2021
Ⅰ. Introduction of high index reflective glass beadsThe usage of high index reflective glass beads is determined according to the actual requirements of customers. According to different uses, lumino...
-
The Main Use of Abrasive Glass Beads
11
01
2021
1. Introduction of abrasive glass beadsGlass beads are essentially a kind of glass bead abrasive. The abrasive beads are mainly powered by compressed air to perform shot blasting or finishing on the s...
-
Construction Skills of Marking Reflective Glass Beads
04
01
2021
1. Spreading amount of reflective glass beadsIn the marking construction, the amount of reflective glass beads should be moderate. Too little, there will be fewer reflective spots, and the reflective ...
Document Download